The 18V LXT® Lithium-Ion Cordless/Corded Work Light (DML811) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 3,000 lumens of light, and 750 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.

It’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. The fast-charging 18V LXT Lithium-Ion 5.0Ah Battery (sold separately) delivers 11 hours of continuous illumination on the low setting.

Portable Belts Open Coat AlO

Portable Belts Open Coat AlO

Aluminum Oxide Resin Fiber Discs

Compact yet powerful, the portable Red Hawk Road is easy to move from task to task.  With 60J of power and 1440 bpm, it delivers the same power-to-weight ratio as many pneumatic and hydraulic breakers without being tied to an external power source or hoses.  In addition, an extensive range of tools allows you to use the Red Hawk Road for evrything from cutting and breaking to driving and compacting.

The Makita 18V LXT® Brushless Cordless 24” Hedge Trimmer Kit (model XHU07T) is part of Makita’s wide range of cordless outdoor power equipment. The XHU07T Hedge Trimmer has a 24" blade for increased cutting capacity and a 5-position rotating handle for increased comfort when trimming vertically or at an angle. A Makita-built brushless motor delivers 4,400 SPM for faster cutting speed when set on the high speed option.

The cordless XHU07T has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pickup your XHU07T, load an 18V LXT® Lithium-Ion battery, and the trimmer is ready to use.

The XHU07T part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

<ul cl

BE Professional 5000 PSI Heavy-Duty Sandblasting Kit

This tool is designed for sanding walls and ceilings made of drywall or plaster in any position. Just use the built in extensions to change the length of the tool from 4 ft. to 7.2 ft. long. The long-reach is ideal for sanding high walls and ceilings. The removable brush segment allows sanding right up to the edge with ease. The tool can be folded in half to reduce the length of the tool and to fit into a carrying case. The motor is mounted on the sanding head to reduce the number of moving parts and provides a direct drive to the sanding head. Center and edge vacuum locations provide a large area of dust collection. The tool provides a easy hook-up with a standard vacuum hose to ensure a dust free working environment. With extension you can easily reach up to 12 1/2 ft.

Low height of 3-1/2" to fit easily under a variety of vehicles

• Maximum lifting height of 23"

• Lift arm is contoured to allow clearance with the vehicle's rocker panel

• Premium U-Cup seals on pumps and ram pistons for long life

• Professional one-piece handle design

• Special high-performance hydraulic oil for extreme temperatures and reduced wear

• Internal filtration with a magnet in the pump reservoir to maintain oil cleanliness

• Powder coated finish for durability

• Dual-pump pistons for speed to reach service height quickly

• Grease fittings in the front wheels

• Grease fittings in the yoke pivot

• Removable saddle with a rubber pad

• Front wheels have a nut and shoulder design for positive retention

The Bosch Combination Hammer has an SDS-MAX drive system and powerful 14 Amp motor for excellent drilling performance. With its combination dual-mode selector, you have 2 modes of operation: rotary hammer and hammer only. For even more user-friendly features, you can use the Vario-Lock positioning system to rotate and lock the hammer chisel in 12 different positions to optimize your working angle.

The Makita 20 lb. Demolition Hammer accepts SDS max bits and provides a hard hitting 18.8 lbs. of impact energy. The constant speed control applies additional power to the motor to maintain speed under load. The soft start feature suppresses start up reaction for more control and better accuracy while the variable speed function enables the user to match the speed to the application. The 12 bit angle settings allow the bit to be set at different positions for operating convenience.

• POWER : 14 AMP motor delivers 950 - 1,900 BPM and 25.5 J/ 18.8 ft.lbs. of impact energy
• CONTROL : Variable speed control dial to match the speed to application.
• PERFORMANCE : Constant speed control to maintain speed under load
• DESIGN : L.E. D. service lights notify user before brushes need to be replaced, switch failure or cord damage
• INCLUDES : Bull point, bit grease and case

The Bosch 11321EVS SDS-max® Demolition Hammer is a 13.0 Amp tool that gets the job done, delivering 6.1 Ft.-Lbs. of impact energy and a max of 2,900 BPM. Yet it weighs only 13.7 Lbs. for outstanding power-to-weight performance, and it has Vibration Control for all-day comfort. This hammer provides Constant Response circuitry for constant power under load, as well as smooth starts and overload protection. Vario-Lock positioning permits rotating and locking the chisel with precision, while the Auto-Max™ variable-speed dial permits the operator to match power to application – from 1,300 BPM to 2,900 BPM. The SDS-max® chuck system provides tool-free bit changes, while the Service Minderlight indicates that maintenance is needed. And the demo hammer has a 360° rotating auxiliary handle and a padded rear handle for extra operator comfort.

The Bosch Combination Hammer has an SDS-MAX drive system and powerful 14 Amp motor for excellent drilling performance. With its combination dual-mode selector, you have 2 modes of operation: rotary hammer and hammer only. For even more user-friendly features, you can use the Vario-Lock positioning system to rotate and lock the hammer chisel in 12 different positions to optimize your working angle.

• 8.8 Amp motor, variable speed 180-360 RPM, 1600-3200 BPM
• Constant-ResponseTM Circuitry - Provides soft-start and constantly monitors and adjust power to maintain desired RPM and impact force for consistent performance and control
• Electro-pneumatic impact system - Piston hit air column to minimize vibration, yet deliver maximum impact force
• SDS-max bit system - Tool-less bit changes, with automatic bit locking, dust protection and efficient impact energy transfer rate
• 2 Modes of operation - Quickly converts from rotation with hammering to hammer only

The new 70 lb. AVT® Breaker Hammer is engineered to hit like an air hammer, but with less noise and vibration. It has a powerful 15 AMP motor that delivers a full 53.9 ft.lbs. (73.8 Joules) of impact energy, so contractors get hard-hitting performance. Users also benefit from less noise and lower vibration than an air hammer, and zero hassle with an air hose and compressor. The HM1812 features the latest Advanced AVT® Technology, a synchronized three-component system that more effectively reduces vibration. The internal mechanical counterbalance system, vibration-absorbing housing, and fixed movement handles are engineered for significantly less vibration during concrete breaking applications.

The JSG-3328 JET pistol grip needle scaler has a heavy-duty pistol grip design for better control and ease of operation. It comes with 14 4mm needles standard and operates at 4,500 blows per minute with a 5/8-Inch stroke. The tool requires 90 psi and will take 8 cfm to operate properly.

The Grip-Rite GRTCN90 coil framing nailer is durable yet lightweight, weighing in at only 6.6 pounds. The selectable trigger allows workers to choose between bump and sequential fire. A rotating belt hook and durable molded rubber grip allow for comfort and ease of use. This tool shoots 15 Degrees wire weld or plastic sheet coil framing nails ranging in size from 1-3/4-Inch to 3-1/2-Inch. Applications include framing, sheathing, decking, sub-floor, decks, pallets and crates.

The Makita 1-1/4 HP Compact Router (model RT0701C) delivers performance and precision in a compact design. With a full 1-1/4 maximum horsepower, the RT0701C is engineered for a range of precision routing applications.

The RT0701C has a powerful 1-1/4 HP (maximum horsepower) motor with a variable speed control dial (10,000-30,000 RPM) that enables the user to match the speed to the application.

The RT0701C is engineered for precision and includes a smooth rack-and-pinion fine depth adjustment system and easy-to-read depth scales for more precise settings. The quick release cam lock system is designed for easy depth adjustments and base removal/installation, with a high-visibility base design for improved handling and performance.

The Makita Portable Band Saw (model 2107FZK) is a compact and versatile solution for metal cutting including pipe, Unistrut®, all-thread, angle-iron, and more.

This RIDGID 15 Amp 10 in. Heavy Duty Portable Table Saw with Stand is equipped with a 4000 RPM motor. It features an updated table saw utility vehicle that provides single-point release for simple 1-step setup and great job site portability. You can easily complete jobs with this saw's user-friendly onboard storage for your miter gauge, extra blades, rip fence and other accessories.

The MK-101-24 features a powerful, high torque, fan-cooled motor and one-piece unitized steel frame. The linear guide bar system provides precise cutting on the entire length of the cut. The blade guard has been engineered to provide optimal water flow and is wide enough to accommodate a profile wheel.

Nailer, Framing 21º Plastic Strip 

15 Gauge Angled Finish Nailer