The 18V LXT® Lithium-Ion Cordless/Corded Work Light (DML811) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 3,000 lumens of light, and 750 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.

It’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT® Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. The fast-charging 18V LXT Lithium-Ion 5.0Ah Battery (sold separately) delivers 11 hours of continuous illumination on the low setting.

Low height of 3-1/2" to fit easily under a variety of vehicles

• Maximum lifting height of 23"

• Lift arm is contoured to allow clearance with the vehicle's rocker panel

• Premium U-Cup seals on pumps and ram pistons for long life

• Professional one-piece handle design

• Special high-performance hydraulic oil for extreme temperatures and reduced wear

• Internal filtration with a magnet in the pump reservoir to maintain oil cleanliness

• Powder coated finish for durability

• Dual-pump pistons for speed to reach service height quickly

• Grease fittings in the front wheels

• Grease fittings in the yoke pivot

• Removable saddle with a rubber pad

• Front wheels have a nut and shoulder design for positive retention

21 pieces

3/4" Drive

450ft/lbs max torque

weight = 4lbs

1/2" Drive

Heavy duty all-metal motor, impact hammer and anvil system - made to hold up in tough environments.

Torque Wrench, Adj. Click Type, U.S., Fixed, 50-250 ft. lb., 1/2" driv

Torque Wrench, Adj. Click Type, U.S., Fixed-Ratchet, 40-200 in. lb., 1/4" drive

Cut steel and other hard metals with this torch set.

Take air wherever you need.

3 sizes available

Great for those sticky ball joints.

Holds up to 5 tons

Be ready for any seperating or pulling jobs with this puller set.

46 piece set

• Automatic pump overload system protects against damage to rams and equipment
• Heavy-walled extension tubes stand up in the toughest situations
• Flex head features permanently molded rubber pad - interlocked to prevent seperation
• 1/2 ton capacity hydraulic spreader features 2" jaws and spreads from 5/8" to 3-3/4"
• 10-ton hydraulic pump

Used for waxing and polishes autos, boats, RV's, etc.

Lift includes a chain and has a1500 lb weight limit.

The Makita PV7001C Vertical Polisher is engineered for improved control and performance. The PV7001C features a Quick-Flip™ speed change for compounding and polishing. The 2-speed selection bottom allows for low speed (600 RPM) and variable speed 9600 - 2,000 RPM). Advanced electronics include soft start for smoother start ups, and electronic speed control to maintain constant speed under load. The PV7001C weighs only 4.4 lbs. for improved control and reduced operator fatigue. 

• POWER : Powerful 7.9 AMP motor
• COMFORT : Lightest tool in its class (4.8 lbs.)
• PERFORMANCE : Variable speed (600- 2,000 RPM) for desired application
• CONVENIENCE : Lock-on switch for continuous operation
• INCLUDES : Pad, side handle, wrench and air deflector

JET 30" Black Head Center-Cut Bolt Cutter is specially designed to produce superior cutting force. The high-carbon alloy tool steel jaws are ideally suited to cutting rebar, medium tensile and soft bolts, rods, rivets, bars and chains with a maximum hardness of HRC-40. Designed with safety in mind, these bolt cutters exceed Federal Specifications and are sure to give you the quality and performance you've come to expect from JET

JET 5/8" Capacity REBAR CUTTER BENDER -- Can be bolted to floor or board for easy one-hand operation. Patented design uses needle bearing for easy cutting. Cuts and bends grade 60 rebar. 5/8" Capacity; 52" length. Jaws are made of high-carbon alloy tool steel, HRC-48. See True Value #724593

JET 1-Ton Capacity TRANSMISSION JACK -- Designed for the removal and installation of auto and light truck transmissions or transfer cases. Wide stance steel frame features reinforced steel side plates that double as tool trays. Heavy-duty steel ball bearing swivel casters. Fully adjustable saddle, corner brackets and safety chains. "Quick" Lift hydraulic pump for rapid lifting to contact point without load. Safety overload and top-of-stroke bypass system provides maximum pump protection. Pump handle swivels 360° for operation in any position. Proof tested and certified. Complies with ANSI/ASME PALD-2 standards. See True Value # 724664

JET 27" x 48" Forks, 6000-LB Capacity 

JET 22-1/2L-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards

JET 15-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards. Turning bar is optional. See True Value # 724607